Buffing and Polishing Compounds, Jm Compounds IncUntitled Document
Paste Polishing Compounds
Available in Quarts,Pints,1 Gallon, 2 Gallon, 5 Gallon, and 55 Gallon Drums
Step One: Fast Cut Compound
Aqua Blue 100X is your environmentally friendly option for rapidly removing scratches on gel coats, FRP parts, plugs, and cultured marble. It is recommended to use on dull and oxidized surfaces as well as for removing wax and styrene build ups. This water based abrasive compound contains no silicones and required only one half the normal compound usages.
Recommended buffing speed: 2,500 RPM
Aqua Blue 100X Composition:
AL203 White Aluminum oxide
40-65%
H20 Water
30-40%
Tallow Glyceride
10-25%
Dehydrogenated tallow
10-25%
Emulsifying agents etc
1-2%
Step One: (Second Option)
Aqua Blue 100XX is a white compound similar to Aqua Blue 100X, but is much more aggresive.
Recommended buffing speed: 2,500 RPM
Step Two: Mirror finish compound
Aqua Blue 200 is our most popular compound. This environmentally friendly option is designed to remove small scratches from gel coats, FRP parts, cultured marbles, and acrylic and primer surfaces. It also polishes surfaces to bright mirror like finish. Water based compounds require only 1/2 of the normal compound usage. If compound becomes dry while parts are being buffed, re-wet agent by misting the surface with water .
Recommended buffing speed: 2,500 RPM
Aqua Blue 200 Composition:
AL203 Calcium alumina
40-65%
H20 Water
30-40%
Tallow Glyceride
10-25%
Dehydrogenated tallow
10-25%
Emulsifying agents etc
1-2%
Step Two: (Second Option)
Aqua Blue300XL - This extremely fine compound gives you a beautiful luster on composite parts. It also removes hairline scratches from polished surfaces. Recommended when extremely fine finish is desired.
Step Three : Cream Wax
Aquawax is an oil based wax. Its original formula contains famous carnauba wax and silicon oil that gives polished surfaces long time protection against weather and UV Rays while eliminating hairline scratches and swirl marks. Aquawax leaves a deep mirror finish on gel coats, fiberglass and painted surfaces. It is suitable for machines and hand polishing. Use wool pads for best results.
